7 Tips for Installing Solid Hardwood Flooring

One of the best ways to increase the value of your home is by updating the flooring of your home. However, the trends of home design are constantly changing, so you should cope with the movement. Fortunately, solid hardwood flooring installation is an easy job if you have the appropriate knowledge, tools, and patience. However, following the seven tips, you can install solid hardwood flooring at your property.

1. Baseboard Removing

Before solid hardwood flooring installation, you should remove the baseboard. However, some recommend you undercut the base, but this exercise requires intensive time, and on the baseboard, you may lose height. Furthermore, you should also consider the baseboard’s up-gradation or replacement at the time of new hardwood installation.

Solid Hardwood Flooring

2. Subfloor Preparation

Subfloor preparation often takes more time than installing the actual solid hardwood flooring. However, how much time the subfloor preparation will take depends on the material of the current floor. Thus prepare your subfloor before starting the installation process.

3. Final Preparation of the Subfloor

After removing the base floor, the final checking of the floor and subfloor is one of the essential tasks. It would help if you did it to check the uneven subfloor, underlayment, and remaining nails on the floor. However, you can use a steel dustpan or large scraper and, at a sharp angle, run it on the entire floor. Moreover, it would help if you made the final preparation of your subfloor to ensure that it’s flat.

4. Laying Moisture Paper/Barrier

When installing solid hardwood flooring, you should set a moisture barrier, and to place it, use a paper underlay. However, this moisture barrier will provide a safe floor from sliding around. Moreover, you should contact your local supplier to get their recommendation. The local supplier can recommend you the best one according to your climate.

5. Racking the Floor

At this stage, you should start to layout your property’s floor. However, the trend has changed over the years, but fundamentals didn’t change at all; they remain the same as before. Always follow some fundamentals at the time of solid hardwood flooring installation.

6. Hardwood Installation and Layout

In solid hardwood floors installation, one of the crucial parts is stapling or nailing. However, the manual nailers consist of lots of pros, and you have to applaud them. Furthermore, one of the best choices is pneumatics because it affects the quality. As humidity and temperature fluctuate, and for this reason, solid hardwood faces natural contraction and expansion. However, the baseboard covers the additional allotted space.

7. Baseboard Installation & Touch Ups

If you assume that your work is done once the solid hardwood flooring installation is complete, then you are wrong. Your baseboard needs to be re-install, and if the wall has any marks or nailing, you should touch up to it. However, our recommendation is to complete the touch-up work before unveiling it for use.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top