8 Tips for Professional Looking Tile Floors

If you desire a professional looking tile floor, you should know what tiles you should buy, how to lessen the tile floors risk, and how to avoid the cracks of the tiles. However, you should know all these because the tile floor will not look as professional if you have bangs or unevenness in it.

1. Flat and Sturdy Sub-floor

Professional Looking Tile Floors

The foundation of your building is essential. However, try to notice whether your floor bounce, flex or squeak at the time of your walking? If yes, then immediately solve the issue. Try to use a level in different areas. Moreover, if the tiles have any high spots, low spots, or slopes at the subfloor, then your tile will not last long. Therefore make sure that you have a flat and sturdy subfloor for a professional looking tile floor.

2. Use an Uncoupling Membrane

The use of an uncoupling membrane is essential for your floor because it prevents the tiles from cracks. However, you should not tile your room without an uncoupling membrane. Moreover, the membranes offer a waterproof floor.

3. Use a Good Tile Cutter

You can smoothly do your tile job using a suitable tile cutter, and it will save your tile from a jagged mess looking. However, you should rent some excellent tools if you can’t afford them. Moreover, you can borrow the tools from your fellow DIYer if you don’t have good tools.

4. Layout Tiles in Advance

If you spend your time in preparation work, in the long run, it will save your time, and it is so true, especially in tiling. However, you should first layout your tiles and then start your job for tile.

5. Leave an Expansion Joint

You should not install or cut your floor too tight against the wall. Leave an expansion of ¼ inch at least around the room perimeter. However, if you don’t follow this rule, your tile floor may tent or pop up. Moreover, in the interior room, you should install a movement joint at every 25 feet in each direction.

6. Use Trowel Size as Recommendation

Tiles require different trowels as it comes in various sizes and shapes. However, you should use the trowel size according to your floor specifications. Moreover, it would help if you asked for a recommendation from your tile shop representative. Furthermore, your tiles may fail to match the surface if you use a small trowel with big tiles. In the same way, smaller tiles and big scoop would not fit.

7. Back Butter Large Tiles

Back buttering is essential when you are tiling a floor. Typically, it would help if you spread the thinnest mortar on the floor and trowel within it. Again, use the thin layer over the floor tile’s back. However, this will result in two things:


☑ It keys any voids into the mortar on the tile’s back
☑ It ensures tiles back full coverage

8. Use Leveling Spacers

One of the new products in the market is leveling spacers, and you should not tile your floor without them. However, leveling spacers are a crucial thing in achieving the professional looking tile floor. However, you can virtually eliminate the tile’s lip page by using the leveling spacers.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top